| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix P2P device removal race in brcmf_detach()
When the driver is removed while the user space process that created
the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device
interface is removed twice and the kernel crashes.
The two paths are:
- wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P
device. nl80211_del_interface() holds RTNL and the wiphy mutex and
calls brcmf_p2p_del_vif(), which disables discovery and waits up to
1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(),
which unregisters the wdev and frees the vif and the ifp.
- brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives,
and calls brcmf_remove_interface(ifp, false) for the same ifp.
brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on
rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls
cfg80211_unregister_wdev() on the wdev that was already unregistered
and freed.
The second list_del_rcu() of wdev->list faults on LIST_POISON2:
brcmfmac: brcmf_p2p_del_vif delete P2P vif
brcmfmac: brcmf_p2p_deinit_discovery enter
brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared
brcmfmac: brcmf_detach Enter
brcmfmac: brcmf_bus_change_state 1 -> 0
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
[1.5 s later, brcmf_p2p_del_vif() timed out]
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
Unable to handle kernel paging request at virtual address dead000000000122
Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP
pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
Call trace:
_cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
cfg80211_unregister_wdev+0x10/0x1c [cfg80211]
brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac]
brcmf_remove_interface+0x1f4/0x254 [brcmfmac]
brcmf_detach+0x88/0x180 [brcmfmac]
brcmf_sdio_remove+0x90/0x7b0 [brcmfmac]
brcmf_sdiod_remove+0x20/0xa0 [brcmfmac]
brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac]
sdio_bus_remove+0x38/0x144
device_release_driver_internal+0x1e8/0x2c0
device_release_driver+0x14/0x20
brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac]
brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac]
__exit_compat+0x18/0x418 [brcmfmac_cyw]
__arm64_sys_delete_module+0x1ac/0x244
The log was taken with debug=0x406 on an i.MX 8M Plus board with a
CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of
brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same
in mainline.
To reproduce:
1. Start wpa_supplicant on wlan0 and let it associate. It creates the
P2P device (iw dev shows "type P2P-device").
2. Stop wpa_supplicant and remove the driver without waiting for
wpa_supplicant to exit:
kill $(pidof wpa_supplicant)
rmmod brcmfmac_cyw brcmfmac
The crash is reproducible on that board.
For the interface without a netdev (the P2P device), take RTNL and the
wiphy mutex in brcmf_detach() before reading iflist, and remove it with
locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the
slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev
any more. The interfaces with a netdev are removed as before, because
brcmf_del_if() takes RTNL on its own for the primary interface. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: io: Reject non-user protection in ioremap_prot()
Mapping a stack-top page via /dev/mem with PROT_NONE and then
reading that process's /proc/<pid>/cmdline triggers a spurious WARN
in ioremap_prot() through generic_access_phys():
WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys
Call trace:
generic_access_phys+0x1c8/0x228 (P)
__access_remote_vm+0x2b4/0x398
access_remote_vm+0x14/0x30
get_mm_cmdline+0xf8/0x2a0
proc_pid_cmdline_read+0x68/0x120
generic_access_phys() passes the protection derived from the user PTE
to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a
present-invalid PTE, so pte_present() still returns true and the
protection reaches ioremap_prot().
A PROT_NONE mapping does not have PTE_USER, causing the existing
WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid
user mapping. Execute-only mappings have the same issue and must not
be readable through this path either.
ioremap_prot() should therefore reject protection values without
PTE_USER without warning. This makes the access fail cleanly for
PROT_NONE and execute-only mappings while retaining the existing
user-protection contract. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: return error early if file xattr cannot be changed
During early boot, the filesystem is read-only and any changes
to xattrs are not allowed. This fails in case of ext4 because
changing xattr starts an ext4 transaction which fails with the
following warning.
WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561
CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4]
Call Trace:
__ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
__vfs_setxattr+0x9a/0xd0
__vfs_setxattr_noperm+0x76/0x1f0
ima_appraise_measurement+0x23e/0xe40
ima_d_path+0x5a/0xd0
process_measurement+0xb29/0xc40
? copy_from_kernel_nofault+0x21/0xe0
? fscrypt_file_open+0xc0/0xe0
? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126
? __bpf_prog_exit+0x23/0xd0
? __bpf_tramp_exit+0xd/0x50
? bpf_trampoline_6442530367+0x9f/0xea
ima_file_check+0x57/0x80
security_file_post_open+0x50/0xf0
path_openat+0x493/0x1650
do_filp_open+0xc7/0x170
Detect the state of the file early and return the error. |
| As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76481 are related to issues concerning improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76527 are related to improper check or handling of exceptional conditions and are grouped under the Common Weakness Enumeration (CWE) CWE-703. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. Treat it as
"nothing new to clean" instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: Prevent creation of classes with TC_H_ROOT
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco NX-OS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76458 are related to improper handling of exceptional conditions issues that are grouped under the Common Weakness Enumeration (CWE) CWE-703. |
| pg_partman is a PostgreSQL extension that manages partitioned tables by time or ID. Prior to 5.5.0, run_maintenance() handles exceptions outside the loop that processes rows from part_config, so an exception for one partition set immediately terminates the loop and skips every later set. A role with partman_user access can insert or update a row that reliably fails and assign it a low maintenance_order value so it is processed before legitimate rows. Repeated maintenance ticks then abort before legitimate partition sets are maintained, causing database-wide loss of automated partition maintenance. This issue is fixed in version 5.5.0. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Parseable is a log analytics platform built for high-volume data ingestion and analysis. Prior to 3.0.0, src/handlers/http/middleware.rs uses unwrap() while parsing the x-amz-firehose-common-attributes header before authentication. A remote unauthenticated attacker can supply non-UTF-8 header data, malformed JSON, or invalid derived header values that trigger a Rust panic and interrupt request handling, allowing repeated requests to deny service or cause container restart loops. This issue is fixed in version 3.0.0. |
| An issue in Robotics-STAR-Lab (SYSU STAR Group) RACER Tested affected version: commit abcdef1234567890 allows an attacker to cause a denial of service via the exploration state machine |
| An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows unsafe vehicle motion via improper handling of expired trajectory data in the replanning pipeline |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20329 are related to issues concerning improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703. |
| In the Linux kernel, the following vulnerability has been resolved:
csky: Fix a4/a5 restoration in syscall trace path
The syscall trace path reloads syscall arguments from pt_regs before
calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall
arguments are prepared as stack arguments before invoking syscallid.
The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since
those offsets are relative to the original pt_regs base, loading them
after changing sp fetches the wrong slots. As a result, traced syscalls
that use the 5th or 6th argument may receive corrupted arguments.
This is visible with mmap2(), which takes six arguments. A small
PTRACE_SYSCALL reproducer opens a file and maps one page with:
mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0)
Before the fix, the traced child fails the mmap and exits with 12.
After the fix, the mapping succeeds and the child exits with 0.
Fix the trace path by loading a4/a5 from pt_regs before changing sp.
Tested on: ck860f, linux-4.19.15, C-SKY abiv2 |
| Higress before 2.2.4 panics when processing a Cookie header segment without an equals sign, causing the plugin wrapper to recover and return a continue action that bypasses AI token rate limiting. Unauthenticated attackers can craft a malformed Cookie header to skip rate limit checks and exceed thresholds intended to restrict costly model backend calls. |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20280 are related to improper checking or handling of exceptional condition issues that are grouped under the Common Weakness Enumeration (CWE) CWE-703. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
