| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical. |
| obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. From 1.0.1 until 1.31.4, `create_entity`, `link_entities`, `rename_entity`, `unlink_entities` and `delete_entity` regenerate memory notes from SQLite at the computed `memory/<type>/<name>.md` path without reliably preserving note ownership or the consistency of a failed lifecycle operation. During shared materialization, a hand-authored note or an orphan left by a different entity whose name sanitized to the same path could have its entire body overwritten on the next write naming that type and name, with non-owned frontmatter preserved. `rename_entity` also seeded the destination path with a direct atomic write without validating ownership and could overwrite a foreign note there. Separately, several tools mutated SQLite before fallible filesystem work: `create_entity` and `link_entities` inserted the row or relation before materialization; `rename_entity` updated the entity, including a retired status, before updating its note; `unlink_entities` removed a relation before rematerializing the source note; and `delete_entity`'s cascade removed the target and its relations before rematerializing neighbouring notes. A later filesystem failure could therefore leave a row or relation changed and the memory graph inconsistent with the notes on disk even when the operation failed. An authorized caller with the required memory-tool permissions could, without intending to, destroy the body of a vault note outside the entity being written; `delete_entity` additionally requires its deletion permission and destructive confirmation, which this memory flaw does not bypass. Snapshots-before-write through `restore_note` mitigate the overwrite only where snapshots are enabled and the note had previously been written through obsidian-tc. This issue is fixed in version 1.31.4. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished(). |
| Incomplete cleanup vulnerability in ABB My Control System.
This issue affects My Control System: 26.4 and 26.5. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN
Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN,
as empirical testing shows that the CPU performs the requested TLB flush if
and only if VMRUN is successful, i.e. clearing TLB control on a failed
VMRUN effectively drops a TLB flush.
Explicitly track the need to flush all ASIDs on a per-CPU basis, as the
ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus,
this also obviates the need to avoid clobbering FLUSH_ALL_ASID with
TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid().
Deliberately don't bother saving/restoring the "old" tlb_ctl on failure,
in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from
after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If
VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next
successful run of the VMCB *may* unnecessarily flush all ASIDs, which
strictly speaking could result in noisy neighbor issues. However, the
fact that new_asid() is already guest-triggerable, because of KVM's flawed
behavior of clearing the ASID on emulated INIT, means that a guest can
already trigger a flush of all ASIDs at roughly the same rate. And once
KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID
to each vCPU, this flaw goes away. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, the unauthenticated Rich Text CSV conversion route writes a multipart upload to the system temporary directory before checking its extension and does not remove the staged file when that validation rejects it. Repeated large rejected uploads, using the normal public CSRF cookie, can persistently consume temporary-disk capacity and may disrupt ApostropheCMS and other services that depend on the same partition. This issue is fixed in version 4.33.0. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox
When tearing down the FW mailbox Rx ring, fbnic_mbx_reset_desc_ring()
writes AW_CFG with FLUSH set and everything else, BME included, cleared.
Clearing BME halts the device's writes to the host but leaves the staged
requests parked in the PUL write pipeline rather than draining them, so
on the write path FLUSH alone never terminates the outstanding requests
and the flush the firmware waits on never completes.
Add the FLUSH_MODE definition and set both bits so the staged writes
drain out of the pipeline on their own. BME stays cleared, so nothing
lands on the host; it is restored later in fbnic_mbx_init_desc_ring()
when the ring is rebuilt, once the outstanding writes are gone.
The read path is unaffected. AR_CFG has no equivalent mode bit and
AR_FLUSH terminates the outstanding reads by itself, so it is left as
is.
Both writes remain plain stores rather than read-modify-writes. That is
deliberate: the matching write in fbnic_mbx_init_desc_ring() restores
BME and the TLP attributes, and clears both flush bits as a side effect. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Tear down inactive DP tunnels when the domain is stopped
tb_stop() only tears down DMA tunnels so a DP tunnel that is still
waiting for dprx_work to complete keeps that work queued while the
routers are removed and the control channel is stopped. The work only
stops once the DPRX timeout has passed and because it requeues itself
until then the flush_workqueue() in tb_domain_remove() won't wait for its
final run. The callback then runs against a domain that is already torn
down. A reference to that domain is kept so the completion waiting for
that domain to disappear in unbind will block until the timeout is
eventually reached.
Tear down DP tunnels that are not active yet as well which also cancels
that work. Tunnels for displays that are already alive are untouched and
keep working. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via clone range
cifs_remap_file_range() discarded the pagecache only for the folios
overlapping the destination region, so when a clone extends the file the
folio straddling the old EOF - which may hold data dirtied past EOF
through an mmap - was never dropped and became visible as file content
once the file was extended.
Start the discard at the smaller of fstart and the old EOF. i_size is
still old here, so nothing past the old EOF is flushed to the server. |
| vLLM before 0.31.0 contains a cross-request mask leak in InputBatch.condense() that allows remote attackers to constrain other clients' outputs by leaving stale allowed_token_ids rows. Attackers can submit concurrent constrained generate requests, including via unauthenticated /invocations, so recycled batch slots apply their token allowlist to victims' unrestricted requests. |
| @fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_ring: fix stale descriptor flags after a failed packed add
In a packed ring the AVAIL and USED bits sit in the descriptor itself,
so writing them makes that descriptor available. Those bit combinations
flip meaning on every round of the ring, tracked by a wrap counter, so
invalidating or validating a descriptor means inverting both bits.
Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has
virtqueue_add_packed() make every descriptor of a chain available as it
maps the chain, and write the head last. The device consumes the ring in
order and stops at a head that is not available yet, so it never reaches
the rest.
When vring_map_one_sg() fails partway, unmap_release unmaps the segments
and restores avail_used_flags, but the descriptors it wrote to in the
ring stay marked with AVAIL and USED bits. The head is now the only
entry that keeps the device from consuming these stale entries.
For example, the ring would look like this now.
Z - pre-previous command
A - previous command
B - aborted command
C - current command
[A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE]
When the driver now attempts to issue the C command, the next add starts
at the same head as B. If C spans less descriptors than B, there is no
end marker because AVAIL and USED bits were still in place. And that
means the device will start interpreting these stale entries (B2/B3) as
another command entry, which then blocks the queue.
This effect typically happens in swiotlb configurations under memory
pressure, because vring_map_one_sg() can then fail with larger I/O
requests which then leads to command abortions.
There are broadly 2 ways to avoid leaving those flags behind:
1) Defer those flags too until the chain is complete.
2) Rewrite those flags for the previous wrap counter.
Implement the second option in both packed add paths. The first option
traverses the chain a second time on every successful add. The second
option invalidates all added descriptors when any add fails.
With this patch applied, a packed virtqueue keeps completing requests
after a failed add. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix session leak in ksmbd_session_register()
See the procedure below:
smb2_sess_setup
ksmbd_smb2_session_create
__session_create
atomic_set(&sess->refcnt, 2)
hash_add(sessions_table, &sess->hlist, sess->id)
ksmbd_session_register
xa_store(&conn->sessions, sess->id, sess) // fail
ksmbd_user_session_put
atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed
Remove the session from sessions_table and drop its table reference if
xa_store() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix dentry folio leak in find_in_level
find_in_level() gets a dentry folio with f2fs_find_data_folio() before
calling find_in_block(). If find_in_block() returns an error, the
function stores the error in res_folio and breaks out of the loop without
dropping the dentry folio.
This leaks the folio reference on the find_in_block() error path. Drop
the dentry folio before returning the error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue()
Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in
airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to
TX_CPU_IDX to notify the NIC the QDMA TX ring is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: only release the dirty pages io tree after successful writes
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
_fsstress_pid=""
workload()
{
dmesg -C
mkfs.btrfs -f -K $dev > /dev/null
echo 1 > /sys/kernel/debug/clear_warn_once
mount $dev $mnt
$fsstress -w -n 1024 -p 4 -d $mnt &
_fsstress_pid=$!
sleep 0
$godown $mnt
pkill --echo -PIPE fsstress > /dev/null
wait $_fsstress_pid
unset _fsstress_pid
umount $mnt
if dmesg | grep -q "WARNING"; then
fail
fi
}
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix controller deregistration
Make sure to deregister the controller before disabling and releasing
underlying resources like interrupts and gpios during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted). |
