| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: don't put a mountpoint on a dentry that's being removed
rmdir(), unlink() and rename() call dont_mount() on the victim and then
detach_mounts() with the victim's inode locked. do_lock_mount() takes
the inode lock of the mountpoint and checks cant_mount() so a mount
can't show up after detach_mounts().
But attach_recursive_mnt() makes a second mountpoint for the root of the
source mount so that the mounts already located at the destination can
be put on top of it. No inode is locked for that one and d_set_mounted()
only refuses a dentry that is unlinked. Between detach_mounts() and
d_delete() the victim is still hashed:
rmrace: b passed dont_mount() and detach_mounts(), sleeping
T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 ()
T1: rmdir(/tmp/plcant/d/b) = 0 errno 0
109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw
108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw
A bind mount of the directory that's being removed is moved beneath an
existing mount while the rmdir() is located between the two calls. The
mount ends up on the removed directory and nothing will ever detach it.
Check cant_mount() in d_set_mounted() as well. dont_mount() raises the
flag under d_lock before detach_mounts() runs so either the mountpoint
is set first and detach_mounts() finds the mount or the flag is seen and
the mount is refused. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: avoid recursive multicast port cleanup
br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL
port groups by calling br_multicast_del_pg(). For S,G entries, that
deletion calls back into br_multicast_sg_del_exclude_ports(), so a large
number of STAR_EXCL ports consumes one kernel stack frame per port and can
hit the stack guard page.
Keep the complete port-group deletion path for cleanup, but suppress the
S,G exclude-port cleanup while that helper is already walking the same
entry. Normal deletion callers retain the existing behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd->otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: spear: initialize IRQ state before requesting alarm IRQ
devm_request_irq() enables the interrupt before it returns, so the handler
may run while probe is still initializing the device. Initialize the MMIO
address and spinlock before requesting the alarm IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: generalize pending status bit
Rename NF_FLOW_HW_PENDING to NF_FLOW_PENDING and use it to inhibit the
flowtable GC worker until pending hw offload work has been completed.
Apparently, nf_flow_offload_stats() can schedule work to retrieve stats
while the flow is being removed by GC.
And this bit can also be used in a follow up patch to disable GC until
the flow has been fully added in both directions.
Revert the reordering done in commit d644b23afe1e ("netfilter:
flowtable: publish HW_DEAD after worker is done") to prevent a race
between GC and hw offload handler. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not wake up kswapd in __kfree_rcu_sheaf()
Since kfree_rcu() can be called under pi_lock (a raw spinlock in the
scheduler), kfree_rcu() itself should never allocate memory with
__GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock,
which leads to a deadlock.
Reproducing the issue even intentionally was not straightforward.
The set_cpus_allowed_force() path that is called under pi_lock is
exercised very rarely, and competing tasks that allocate memory will
most likely wake kswapd up.
Therefore the existence of the deadlock was verified with a modified
kernel that has a lockdep map for waking up kswapd:
======================================================
WARNING: possible circular locking dependency detected
7.2.0-rc1-slab-for-next+ #10 Not tainted
------------------------------------------------------
git/6660 is trying to acquire lock:
ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20
but task is already holding lock:
ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&pgdat->kswapd_wait){....}-{3:3}:
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
__wake_up_common_lock+0x31/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
-> #1 (kswapd_wakeup){-.-.}-{0:0}:
__lock_acquire+0x5a4/0xc50
lock_sync.part.0+0x75/0x100
lock_sync+0x36/0x70
might_wakeup_kswapd+0x61/0xa0
__kfree_rcu_sheaf+0x33/0xd90
kvfree_call_rcu+0x1d4/0x3b0
set_cpus_allowed_force+0x163/0x220
cpuset_cpus_allowed_fallback+0x18b/0x240
select_fallback_rq+0x1e6/0x250
[...]
-> #0 (&p->pi_lock){-.-.}-{2:2}:
check_prev_add+0xe6/0xe00
validate_chain+0x51e/0x6e0
__lock_acquire+0x5a4/0xc50
lock_acquire.part.0+0xb7/0x240
lock_acquire+0x70/0x170
__raw_spin_lock_irqsave+0x44/0x80
_raw_spin_lock_irqsave+0x12/0x20
try_to_wake_up+0x77/0xa90
default_wake_function+0x27/0x60
autoremove_wake_function+0x23/0xb0
__wake_up_common+0xb8/0x170
__wake_up_common_lock+0x51/0xa0
__wake_up+0x20/0x40
kswapd_wakeup_wake+0x7e/0x110
wakeup_kswapd+0x295/0x320
wake_all_kswapds+0xac/0x1a0
__alloc_pages_slowpath.constprop.0+0x282/0xf80
__alloc_frozen_pages_noprof+0x32a/0x360
alloc_slab_page+0x2e/0x160
allocate_slab+0x82/0x420
new_slab+0x52/0xb0
refill_objects+0x13d/0x190
refill_sheaf+0x5d/0xd0
__pcs_replace_empty_main+0x230/0xb10
[...]
other info that might help us debug this:
Chain exists of:
&p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pgdat->kswapd_wait);
lock(kswapd_wakeup);
lock(&pgdat->kswapd_wait);
lock(&p->pi_lock);
*** DEADLOCK ***
3 locks held by git/6660:
#0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60
#1: ffffffff8a31c460 (kswapd_wakeup){-.-.}-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: put property on deadprops only after changeset add succeeds
add_changeset_property() links a new property of a not-yet-live
target node into the node's deadprops list before handing it to
of_changeset_add_property(). If that fails, the error path frees the
property but leaves the freed pointer linked in deadprops, and
of_node_release() frees it a second time when the aborted overlay's
node is released.
Record the changeset entry first and link the property into deadprops
only on success. of_changeset_add_property() never looks at the
node's property lists, so the order of the two steps is otherwise
immaterial, and the error path frees a property that nothing
references. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex
An RFCOMM connect() issued while a BR/EDR link is being authenticated
makes lockdep report a circular dependency, and the reported cycle is a
real AB/BA between rfcomm_mutex and hdev->lock.
rfcomm_security_cfm() is called from the HCI event path, which already
holds hdev->lock:
hci_rx_work()
hci_event_packet()
hci_cc_read_enc_key_size() [hdev->lock]
hci_encrypt_cfm() [hci_cb_list_lock]
rfcomm_security_cfm() [rfcomm_mutex]
while an RFCOMM connect() from userspace takes the same two locks the
other way round:
rfcomm_sock_connect()
rfcomm_dlc_open() [rfcomm_mutex]
__rfcomm_dlc_open()
rfcomm_session_create()
kernel_connect()
l2cap_sock_connect()
l2cap_chan_connect() [hdev->lock]
WARNING: possible circular locking dependency detected
kworker/u131:1/1128 is trying to acquire lock:
rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm]
but task is already holding lock:
hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0
Chain exists of:
rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock
hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback
the same way.
Both orders have to be seen in the same boot, which is why a BR/EDR
connection alone is not enough to show it: a session set up by the
remote side is created by rfcomm_accept_connection() in krfcommd, which
calls kernel_accept() and never takes hdev->lock under rfcomm_mutex.
Connecting a device that authenticates and encrypts the link and then
calling connect() on an RFCOMM socket towards any address - the connect
does not have to succeed, the order is recorded before the page timeout
- reports it every time.
Only the session socket has to be connected with the lock held, and it
does not: nothing else can see the socket before it is put on the
session list. So connect it first and take rfcomm_mutex afterwards,
which removes the rfcomm_mutex -> hdev->lock order for good, rather
than keeping the HCI event path out of rfcomm_mutex.
rfcomm_session_create() becomes rfcomm_session_connect(), which returns
the connected socket without touching the session list, and
rfcomm_dlc_open() adds the session once it holds the lock again. If
another opener added a session for the same pair while this socket was
connecting, that session is used and this socket is dropped.
__rfcomm_dlc_open() now takes the session it should use, and its state
check runs after the lock is re-acquired, so a DLC that was opened or
closed in the meantime is still handled.
Over an existing ACL link the connection can complete before the
session reaches the list, and the wakeup from the socket callback is
then lost, so krfcommd is woken once the session is visible.
Connecting without the lock opens a window in which the socket can be
closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds
nothing to do and returns without touching it, and rfcomm_dlc_open()
would then attach a DLC whose owner is gone. rfcomm_dlc_close() now
marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the
mark once it holds rfcomm_mutex again and drops the socket instead of
attaching the DLC. The mark is cleared when an open starts, so a DLC
that is reused is not affected. This covers both callers of
rfcomm_dlc_open(), the socket and the tty layer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Serialize concurrent connect calls
iso_sock_connect() checks the socket state before taking the socket lock
and drops the lock again before setting up a connection. Two callers can
both pass the admission check while the socket is open or bound.
Caller A can copy its destination for route selection, then caller B can
replace the socket destination before A binds or connects the CIS. A
then uses B's destination with the route selected for its own request.
B can also proceed after A attaches a connection and sets BT_CONNECT.
For deferred BIS setup, B can bind a second BIS and overwrite
iso_pi(sk)->conn, leaving the first connection's reference and conn->sk
back-pointer stranded. Concurrent CIS connects can likewise replace the
socket's connection. Later teardown only detaches the current connection,
so a callback on the old connection can race with socket release and
access a freed socket.
KASAN reported:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0
Call Trace:
iso_sock_hold+0xf7/0x1b0
iso_conn_del+0x7b/0x1d0
iso_connect_cfm+0x186/0x16a0
hci_conn_failed+0x154/0x280
hci_abort_conn_sync+0x3dc/0x7d0
hci_cmd_sync_work+0x173/0x300
Allocated by task 121:
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 121:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
Check admission under the socket lock and mark the connect operation in
progress before publishing its destination. Keep that flag set across
route lookup and connection setup, rejecting another connect with
-EBADFD before it can change the destination or attach a connection.
Clear the flag after either helper returns, including on failure, so a
failed setup can be retried.
A separate flag is needed because the socket lock must be released before
acquiring the HCI device lock, while BT_CONNECT requires an attached
connection. Keep the existing state transitions and the deferred CIS
completion through iso_sock_recvmsg().
Reject an existing socket attachment in __iso_chan_add() before taking
a new reference or publishing either pointer, so every caller preserves
the connection association. Keep the same-socket, same-connection success
case for deferred CIS setup. Reject an attached socket before BIS setup
so a reusable BIS is not claimed before the attachment is rejected.
In CIS setup, reject a different HCI connection before iso_conn_add()
and drop the per-attempt HCI hold directly. An unowned iso_conn may still
carry another reference after detachment, so its destruction cannot be
relied on to release that hold.
iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock,
so the temporary iso_conn_put() frees the ISO candidate and drops its
HCI hold on rejection. iso_conn_ready() uses a freshly allocated,
unpublished child with no connection, making the socket-side rejection
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: register TEE devices only once fully initialized
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_get(), which merely checks that
teedev->desc is non-NULL, which was already set by tee_device_alloc().
Therefore, there is effectively no gate at all.
A context opened in that window can run against a struct optee where
- optee->call_queue.mutex is not initialized by optee_cq_init()
- optee->supp mutex and completions is not initialized by
optee_supp_init()
- optee->rpmb_dev_mutex is not initialized yet,
- the message argument cache is not initialized by
optee_shm_arg_cache_init()
- optee->ctx is still NULL
Any open session or invoke during this window takes uninitialized
mutexes and dereferences a NULL pointer.
Fix it by moving both tee_device_register() calls down to the point
where all of struct optee is set up.
[JW: adding fixes and cc] |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: protect clcsock lifetime in smc_getname
smc_getname() dereferences smc->clcsock without holding
clcsock_release_lock. Link-group termination can release the CLC socket
through smc_close_active_abort() while the SMC socket is still open,
for example after shutdown(SHUT_WR).
A getsockname() caller can load smc->clcsock, then the termination worker
can clear the pointer and call sock_release() before the caller accesses
clcsock->ops or invokes getname(). This causes a use-after-free; if the
worker clears the pointer before the load, it causes a NULL dereference.
The syscall's file reference keeps the SMC socket alive but does not
prevent asynchronous release of its CLC socket.
KASAN reported the following with test-only timing instrumentation:
BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0
Read of size 8 at addr ffff888109abb4e0 by task poc/103
Call Trace:
smc_getname+0x19e/0x1b0
do_getsockname+0xe5/0x170
__sys_getsockname+0x8c/0x100
Allocated by task 95:
sock_alloc_inode+0x1e/0x280
sock_alloc+0x3d/0x240
__sock_create+0x7e/0x430
smc_create+0x121/0x240
Freed by task 0:
kmem_cache_free+0xcc/0x340
rcu_core+0x50a/0x1850
Last potentially related work creation:
evict+0x446/0x6c0
smc_clcsock_release+0xa8/0xd0
smc_close_active_abort+0x26a/0x3a0
__smc_lgr_terminate.part.0+0x137/0x2e0
Hold clcsock_release_lock across the pointer check and the getname()
callback to serialize with smc_clcsock_release(). Return -EBADF if the
CLC socket has already been released, preserving the existing peer
state check and the callback's return value otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
In paste_selection(), the loop copies min_t(unsigned int,
vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into
tty_ldisc_receive_buf() and increments pasted += count.
Because the selection mutex (vc_sel.lock) is dropped inside the loop
Whenever the line discipline buffer fills up and paste_selection()
sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl
can replace vc_sel.buffer with a shorter selection and reduce
vc_sel.buf_len below pasted.
When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an
unsigned integer to a large positive value, causing
tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read
up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer.
Fix this by terminating the loop when pasted >= vc_sel.buf_len.
Kernel stack trace (Linux 7.3.0-rc3):
==================================================================
BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650
Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65
Workqueue: events_unbound flush_to_ldisc
Call Trace:
<TASK>
dump_stack_lvl+0x70/0xa0
print_report+0x153/0x4c6
kasan_report+0xf1/0x120
kasan_check_range+0x11c/0x200
__asan_memcpy+0x29/0x70
n_tty_receive_buf_common+0xa01/0x1650
tty_ldisc_receive_buf+0x66/0x110
tty_port_default_receive_buf+0x6b/0xb0
flush_to_ldisc+0x1b4/0x410
process_one_work+0x6ff/0x1110
worker_thread+0x4a8/0xb70
kthread+0x307/0x3e0
ret_from_fork+0x3ed/0x680
</TASK>
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
module: fix lost error code from codetag_load_module()
If codetag_load_module() fails, err is not set to reflect the failure
and load_module() returns 0 after the module has been torn down.
Also, if the module is a livepatch, mod->klp_info allocated by
copy_module_elf() leaks on this error path. Free it via a new
livepatch_cleanup label. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: check RCV_SHUTDOWN after the sendmsg connect wait
sctp_wait_for_connect() drops the socket lock while it sleeps. An
out-of-the-blue ABORT can then be processed from the socket backlog and
unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets
RCV_SHUTDOWN, the waiter breaks with err == 0 before checking
asoc->base.dead. Its final sctp_association_put() can then free the
association, leaving sctp_sendmsg_to_asoc() to continue with a dangling
pointer.
Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc()
before using the association again. The check only accesses the socket,
so it needs no additional association reference. Return the existing
-ESRCH so that sctp_sendmsg() skips freeing a new association that may
already have been destroyed.
Keep sctp_wait_for_connect() unchanged to preserve its behavior for the
connect() caller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: extend IPv6 exthdr detection of tunneled packets
Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM
GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive
branches on skb->encapsulation. This did not yet address all paths:
1. With skb->encapsulation set, the outer header is not checked. IPv6
tunnels such as ip6_gre and ip6_tunnel add an outer Destination
Options header by default (encap_limit). Their GSO packets skip
software GSO, then skb_csum_hwoffload_help() sees the outer extension
header and calls skb_checksum_help() on the GSO skb, which warns and
drops it.
2. Tunnels over IPv6 without an outer transport header, such as
ip6_tunnel, leave skb->transport_header at the inner transport
header. skb_network_header_len() then spans the outer IPv6, tunnel
and inner IP headers, a false positive.
3. UDP tunnels without an inner network header, such as SCTP-in-UDP or
PSP, have no inner IPv6 header to check. Decide on the outer header
alone.
4. Directly dereferencing inner_ip_hdr(skb)->version without
skb_header_pointer() is unsafe.
Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if
set, on the inner IPv6 header. Read the headers with skb_header_pointer().
Keep the skb_network_header_len() check when !skb->encapsulation to also
catch encapsulated packets without skb->encapsulation (e.g., virtio).
Use the same helper in skb_csum_hwoffload_help(). Its open coded test
has the false positive of (2) and ignores the inner header.
Background: checksum offload of tunneled packets invariants:
Non-GSO skb:
- If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes
the outer checksum in software and the device offloads only the inner L4
checksum.
- If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP,
Remote Checksum Offload), the device offloads the outer UDP or GRE
checksum instead.
GSO skb:
- A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM
computes both inner and outer checksums per segment.
The outer checksum is seeded with only the pseudo-header checksum.
A NETIF_F_IPV6_CSUM device must parse through the outer headers to
reach the inner ones. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: rtsx_usb_ms: complete requests after eject instead of dropping them
memstick_check() can pass its host->removing check just before
rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then
silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject
is set, and drv_remove's cancel_work_sync() can also cancel a queued
handle_req before it picks the request up. Nobody completes
card->mrq_complete.
Once memstick core waits for requests without a timeout ("memstick: core:
wait for request completion before freeing card"), this hangs removal:
memstick_check() never returns and memstick_remove_host() blocks in
flush_workqueue():
INFO: task kworker/u10:3:65 blocked for more than 20 seconds.
Workqueue: kmemstick memstick_check
__wait_for_common
memstick_check
INFO: task kworker/1:1:33 blocked for more than 20 seconds.
Workqueue: usb_hub_wq hub_event
__flush_workqueue
memstick_remove_host
rtsx_usb_ms_drv_remove
Never drop a request. rtsx_usb_ms_request() always schedules handle_req,
and handle_req fails requests with -ENOMEDIUM once eject is set, without
touching the device. drv_remove flushes handle_req instead of cancelling
it, and cancels it only after memstick_remove_host(), when no new
request can arrive, so it cannot run on a freed host.
The host_mutex drain in drv_remove is removed: handle_req always leaves
host->req NULL when it finishes, so the drain never had anything to do,
and it would now race with handle_req. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch()
bpf_mem_cache_free_rcu() uses this_cpu_ptr() which requires migration
to be disabled. All callers of rhtab_delete_elem() disable migration
except __rhtab_map_lookup_and_delete_batch(), which calls it under
rcu_read_lock() only.
On CONFIG_PREEMPT_RCU, rcu_read_lock() does not disable preemption or
migration, so the task can migrate between CPUs during the delete loop,
causing this_cpu_ptr() to trigger:
BUG: using smp_processor_id() in preemptible [00000000] code
Fix by wrapping the delete loop in migrate_disable()/migrate_enable()
in __rhtab_map_lookup_and_delete_batch(), matching the migration
protection that the other callers already provide. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk()
With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates
the recycle stats after dropping the producer lock. If it just recycled
the last inflight netmems of a pool being destroyed, page_pool_release()
can pass its producer-lock barrier and free the pool before
recycle_stat_add() runs.
Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk")
moved this stat update after the unlock. Commit 271683bb2cf32
("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later
added the barrier, but only fixed page_pool_recycle_in_ring(). Move
the update back under the lock. |
